Exclude Case

True/False value tied to "Do not report this case" setting on Eco Options form. True being checked.

Exclude Cash Flow

Tied to drop down for "Cash Flows Reported" on Eco Options form, show All or None value.

Volume Exclusion

Tied to drop down for "Volumes Reported" on Eco Options form, shows all four options as they appear in drop down.

Abdn Inv Date

Abandonment Investment Date is the date at which the abandonment investment occurs in the current scenario. Shows the date of the first Abandonment to happen (Earliest abandonment date).

Abdn Inv Value (Grs)

Abandonment Investment Value is the sum of all the abandonment investment for the case in the current scenario.

First Inv Date

First Investment Date is the date at which the first investment on the case was made in the current scenario regardless of when the investment occurred.

First Inv Value (Grs)

First Investment Value is the value of the first investment on the case was made in the current scenario regardless of when the investment occurred.

Fixed Cost

The fixed costs after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Diff ($)

The price add differential associated with the gas product. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Diff (%)

The price percent differential associated with the gas product. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Energy Factor

The gas energy factor for the segment at the report date or first production date (whichever comes later). The amount per unit volume of gas that can be burned off. This is only useful and available when the unit for gas price is in $/MMBTU.

Gas Op Cost

The gas operating expenses after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Price

The price of natural gas after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Shrinkage (% One)

The first shrinkage deck for the gas product which is in %. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Shrinkage (% Two)

The third shrinkage deck for the gas product which is in %. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Shrinkage (Volume)

The second shrinkage deck for the gas product which is in a fixed volume of gas per month. Displays the value for the segment at the report date or first production date (whichever comes later).

Gas Trans Cost

The cost of transporting the gas product. Displays the value for the segment at the report date or first production date (whichever comes later).

LNRI Interest

Lease NRI at the Report Date for current scenario.

Net Interest

Sum of Revenue Interest + Royalty Interest at the Report Date for current scenario.

Net Profits Int

Net Profits Interest at the Report Date for current scenario.

NGL Diff ($)

The add price differential associated with the NGL product. Displays the value for the segment at the report date or first production date (whichever comes later).

NGL Diff (%)

The percent price differential associated with the NGL product. Displays the value for the segment at the report date or first production date (whichever comes later).

NGL Price

The price of NGL after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Oil Diff ($)

The add price differential associated with the Oil product. Displays the value for the segment at the report date or first production date (whichever comes later).

Oil Diff (%)

The percent price differential associated with the Oil product. Displays the value for the segment at the report date or first production date (whichever comes later).

Oil Op Cost

The oil operating expense after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Oil Price

The price of oil after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Oil Trans Cost

The cost of transporting the oil product. Displays the value for the segment at the report date or first production date (whichever comes later).

Rev Interest

Revenue Interest at the Report Date for current scenario.

Roy Interest

Royalty Interest at the Report Date for current scenario.

Total Inv (Grs)

The sum of all the investment made on the case.

Water Op Cost

The water operating expense after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Water Trans Cost

The cost of transporting the water product. Displays the value for the segment at the report date or first production date (whichever comes later).

Well Cost

The monthly well cost per month after all adjustments have been applied. Displays the value for the segment at the report date or first production date (whichever comes later).

Wrk Interest

Working Interest at the Report Date for current scenario.

Commercial Status

Is the case commercial or non-commercial at the report date for the current scenario

ECL

Economic Limit of a case – The date that the case reaches its economic limit depending on the Economic Limit type selected.

IROR

Internal Rate of Return - The discount rate at which the discounted net cash flow equals zero.

Life (Rem Years)

This is the time from the report start date to the ECL of the case.

Life (Total Years)

This is the time from Eco Start date to the ECL of the case.

ROI (Disc.)

Discounted return on investment – this is the ratio of the discounted operating income and the discounted investment.

ROI (Undisc.)

Undiscounted return on investment – This is the ratio of the amount of return to the investment. The amount of return is the total operating income over the life of the case.

Value M$ (Disc.)

This is the sum of the discounted net cash flow from the report start date to the ECL of the case.

Value M$ (Undisc.)

This is the sum of the undiscounted net cash flow from the report start date to the ECL of the case.

Years to Payout

The time, in years, at which the Non-discounted Cumulative Cash Flow for a case goes from negative to positive.

Expense

This is the highest ranked qualifier that has data in it for the expense qualifier category. It could be the primary qualifier of an alternate qualifier.

Investment

This is the highest ranked qualifier that has data in it for the investment qualifier category. It could be the primary qualifier of an alternate qualifier.

Ownership

This is the highest ranked qualifier that has data in it for the ownership qualifier category. It could be the primary qualifier of an alternate qualifier.

Price

This is the highest ranked qualifier that has data in it for the price qualifier category. It could be the primary qualifier of an alternate qualifier.

PRMS

This is the highest ranked qualifier that has data in it for the PRMS qualifier category. It could be the primary qualifier of an alternate qualifier.

Projection

This is the highest ranked qualifier that has data in it for the projection qualifier category. It could be the primary qualifier of an alternate qualifier.

Shrinkage

This is the highest ranked qualifier that has data in it for the shrinkage qualifier category. It could be the primary qualifier of an alternate qualifier.

Case Name

The name of the case that is displayed on the Case List.

Case Type

The type of case includes Standard, Aggregate Unit, Allocation Unit, GEL Unit, Projection Unit, Recompletion Unit, Sum Plot, or Normalized Curve.

Convention

The unit convention used for the case and must be one of the available conventions set up in the Database settings.

Country

The country in which operations are taking place for the case.

County

The county in which operations are taking place for the case.

Field

The field in which operations are taking place for the case and must be one of the available fields as set up in the Database settings.

Gas Gatherer

The energy company that will be receiving the gas that comes out of the case. It is usually a midstream or natural gas company.

Latitude

The locational latitude coordinate of the case. If a case has a single wellbore, the latitude reflects the surface latitude of that wellbore. If the case has multiple wellbores, it shows the average of the surface latitudes for all wellbores.

Location

The block and section that the case is located in.

Longitude

The locational longitude coordinate of the case. If a case has a single wellbore, the longitude reflects the surface longitude of that wellbore. If the case has multiple wellbores, it shows the average of the surface longitudes for all wellbores.

Major Phase

Displays value for Major Phase as specified in the General Info form.

Oil Gatherer

The energy company that will be receiving the oil that comes out of the well. This is sometimes the same as the operator.

Operator

The Oil and Gas operator that has the majority working interest in the case.

Phase Configuration

This is a term used to describe the products, products' behavior, and relationship between the products on each case. These options are defined under the Products Configuration option on the Database Settings ribbon.

PRMS - Categories & Subcategories

This describes how likely a well or case will be productive or contains hydrocarbons and the current state of the case. The category & subcategory selected must be available in the Database settings.

PRMS - Category

This describes how likely a well or case will be productive or contains hydrocarbons. For the Reserves classification, the default categories are Proved, Probable, and Possible. The category selected must be one of the available categories set up in the Database settings.

PRMS - Classification

This describes the commercial certainty of the case. The defaults are Reserves, Contingent Resources, and Prospective Resources, which translate into Commercial, Sub-Commercial, and Potentially Commercial respectively. The classification entered here must be one of the available categories set up in the Database settings.

PRMS - Subcategory

This depends on the selected category and describes the current state of the case. For a proved category, the subcategories are producing, behind pipe, non-producing, shut-in, undeveloped, and injection. The subcategory selected must be one of the available categories set up in the Database settings.

Reservoir

The reservoir in which the case is producing from and must be one of the available reservoirs as set up in the Database settings. It is nested underneath a given field.

State

The state (if United States) in which the case is being operated.

Total Depth

The total measured depth of the well. For a case with a single wellbore, this is the total measured depth of that wellbore. For a case with multiple wellbores, this is the measured depth of the longest wellbore.

Well

The well number associated with a case.

Well Type

The well type includes Flow, INJ (Injector), Pump, Source, SWD (Saltwater Disposal) or Unknown.

Alternate Id

This displays the code in the alternate ID slot.

API Number

American Petroleum Institute (API) number is a unique number assigned to every oil and gas well drilled in the United States

API Formatted

API number formatted with dashes to show a breakdown of API number into State code, County code, Wellbore ID, and directional sidetrack & event code: _ _ - _ _ _ - _ _ _ _ _ - _ _ _ _.

Case ID

A code that is created by PHDwin that ties each record to a case in PHDwin.

DRI

This displays the ID code created when data is imported from Enverus/Drilling Info.

Eia23CountyCode

EIA standard county code for use in Form EIA-23L, Annual report of domestic oil and natural gas reserves. It’s a three-digit numeric code for the county or parish in which operated wells are located.

Eia23FieldCode

EIA standard field name code for identified oil and/or gas fields in the United States.

Eia23StateCode

EIA standard State code for use in Form EIA-23L, Annual report of domestic oil and natural gas reserves. It’s a two-character alphabetic abbreviation of the State that data reported pertains.

Eia23SubCode

EIA standard subdivision code for use in Form EIA-23L, Annual report of domestic oil and natural gas reserves. It’s a two-digit code of the appropriate geographic subdivision to which data reported for pertains.

Eia23TypeCode

EIA standard type code for use in Form EIA-23L, Annual report of domestic oil and natural gas reserves. Used to classify a reservoir as conventional (C), Shale (SH), or Low Permeability (LP).

Field Code

The code for the field listed on the case.LP).

Operator Code

The code for the operator listed on the case.

Retrieval Code

This displays the code associated with the primary import ID of the source used to create the case. If the case was created using a DRI file, the retrieval code would match the DRI code for the case.

RRC Dist Code

The code for the RRC district listed on the lease (Texas).

Unique ID

This is an ID assigned by PHDWin, and is used for merging and exporting, to ensure that duplicate leases can be found. This is a very large number and cannot be edited.

Custom ID Code

This displays other ID code values created by the user within PHDwin or through an import file.

Gas BFactor

BFactor from Segment 1 of Gas Forecast. If forecast is not Arps, leave blank..

Gas Initial Decline

Decline from Segment 1 of Gas Forecast.

Gas Initial Forecast Method

Forecast method of segment 1 of gas product.

Gas Qi

Initial rate from start of Segment 1 of Gas forecast.

Gas Rpt Date Decline

Decline rate from Gas Forecast at Report Date..

Gas Rpt Date Forecast Method

Forecast method of gas active segment on report start date.

Gas Rpt Date Qi

Initial rate from Gas Forecast at Report Date. qualifier.

Major Start Date

Beginning date of 1st segment of the Major Phase forecast.

Oil BFactor

BFactor from Segment 1 of Oil Forecast. If forecast is not Arps, leave blank..

Oil Initial Decline

Decline from Segment 1 of Oil Forecast.

Oil Initial Forecast Method

Forecast method of segment 1 of Oil product.

Oil Qi

Initial rate from start of Segment 1 of Oil forecast.

Oil Rpt Date Decline

Decline rate from Oil Forecast at Report Date..

Oil Rpt Date Forecast Method

Forecast method of Oil active segment on report start date.

Oil Rpt Date Qi

Initial rate from Oil Forecast at Report Date. qualifier.

Project Name

If case belongs to a Project, this will show Project Name, otherwise it's blank.

Gas Economic EUR

Sum of Gas production prior to the Economic Limit.

Gas First Prod Date

First date of Gas production, from monthly history or forecast, whichever comes first.

Gas Hist End Date

End of Gas historical monthly production.

Gas Historical Cum

Sum of Gas production from Monthly Production table only.

Gas Rem Reserves

Sum of Gas production between Report Date and Economic Limit.

Gas Rpt Date Cum

Sum of Gas production prior to Report Date in current scenario.

Gas Tech EUR

Sum of all Gas production volumes, historical + forecast, no cut off.

NGL Economic EUR

Sum of NGL production prior to the Economic Limit.

NGL First Prod Date

First date of NGL production, from monthly history or forecast, whichever comes first.

NGL Hist End Date

End of NGL historical monthly production.

NGL Historical Cum

Sum of NGL production from Monthly Production table only.

NGL Rem Reserves

Sum of NGL production between Report Date and Economic Limit.

NGL Rpt Date Cum

Sum of NGL production prior to Report Date in current scenario.

NGL Tech EUR

Sum of all NGL production volumes, historical + forecast, no cut off.

Oil Economic EUR

Sum of Oil production prior to the Economic Limit.

Oil First Prod Date

First date of Oil production, from monthly history or forecast, whichever comes first.

Oil Hist End Date

End of Oil historical monthly production.

Oil Historical Cum

Sum of Oil production from Monthly Production table only.

Oil Rem Reserves

Sum of Oil production between Report Date and Economic Limit.

Oil Rpt Date Cum

Sum of Oil production prior to Report Date in current scenario.

Oil Tech EUR

Sum of all Oil production volumes, historical + forecast, no cut off.

Water Economic EUR

Sum of Water production prior to the Economic Limit.

Water First Prod Date

First date of Water production, from monthly history or forecast, whichever comes first.

Waterl Hist End Date

End of Water historical monthly production.

Water Historical Cum

Sum of Water production from Monthly Production table only.

Water Rem Reserves

Sum of Water production between Report Date and Economic Limit.

Water Rpt Date Cum

Sum of Water production prior to Report Date in current scenario.

Water Tech EUR

Sum of all Water production volumes, historical + forecast, no cut off.

Lateral Length Avg

This shows the length of the horizontal section of the wellbore. If the case has multiple wellbores and/or completions, it shows the average Lateral Length across all wellbores/completions.

Lateral Length Max

This shows the length of the horizontal section of the wellbore. If the case has multiple wellbores and/or completions, it shows the maximum Lateral Length across all wellbores/completions.

Lateral Length Min

This shows the length of the horizontal section of the wellbore. If the case has multiple wellbores and/or completions, it shows the minimum Lateral Length across all wellbores/completions.

Lateral Length Sum

This shows the length of the horizontal section of the wellbore. If the case has multiple wellbores and/or completions, it shows the sum of Lateral Length across all wellbores/completions.

Plugged Date Max

The date the wellbore was plugged/abandoned. If the case has multiple wellbores, it shows the latest (maximum) plugged date

Plugged Date Min

The date the wellbore was plugged/abandoned. If the case has multiple wellbores, it shows the earliest (minimum) plugged date

Proppant Avg

This shows the mass of proppant pumped during completion of the wellbore. If the case has multiple wellbores and/or completions, it shows the average proppant mass across all wellbores/completions.

Proppant Max

This shows the mass of proppant pumped during completion of the wellbore. If the case has multiple wellbores and/or completions, it shows the maximum proppant mass across all wellbores/completions.

Proppant Min

This shows the mass of proppant pumped during completion of the wellbore. If the case has multiple wellbores and/or completions, it shows the minimum proppant mass across all wellbores/completions.

Proppant Sum

This shows the mass of proppant pumped during completion of the wellbore. If the case has multiple wellbores and/or completions, it shows the sum of proppant mass across all wellbores/completions.

Spud Date Max

The date drilling of the well started. If the case has multiple wellbores, it shows the latest (maximum) spud date

Spud Date Min

The date drilling of the well started. If the case has multiple wellbores, it shows the earliest (minimum) spud date